CM-Cabinets Library User Guide
The report layout for hardware reports are setup using the Reports > Hardware page in the Catalog/Drawing Properties.
Hardware reports are lists of the hardware items such as Handles, Hinges and Hardware Packs used on a job.
The latest version of CabMaster uses RDL (Report Definition Language) for defining and running reports reports.
To locate information about any option on the following image, 
click on the area of interest.
(RDLClientHard) Whether or not to include Client details in the header of the report.
(RDLJobNotesHard) Whether or not to have Job Comments show on reports - See Job Setup > Site page.
Example
(RDLCostsHard) Include costs and totals.
Example
(RDLPartNoHard) Include part numbers in descriptions.
Example
(RDLSupplierHard) include Supplier details.
For an example of report, see tutorial on Pricing Hardware Items by Supplier.
(RDLNotesHard) include Cabinet Notes (Comments)if entered on the cabinets Information page, as per example.
Example
(RDLHolesHard) For the Ancillary statistics to show on a report the option needs to be checked on - see Ancillary Configuration.
(RDLDimsHard) Include the dimensions of each cabinet as a whole.
Example
(RDLDimsSeparatorHard) Include separation characters e.g. "@" or "x" between cabinet dimensions.
Example
(RDLUseUnitsHard) Include dimension units e.g. "mm".
Example
(RDLDimsOrderHard) Reverse Height x Width dimensions for the Cabinet.
Example
Floor 1 Door Cabinet dimensions H:876 x W:450 x D:560 are displayed.
Click to view cabinet settings and comparisons
(RDLDimsHeightKickHard) Include the Kickboard Height in the Cabinet's Height dimension.
Example
= Height does NOT include kickboard
If the kickboard height is 126mm and the height to the top of the bench of a Floor cabinet is 876mm then, if this option is unticked, the cabinet dimension height would be 750mm (i.e. 876mm less 126mm).
(RDLDocNameHard) Whether or not to include the drawing file name on the footer of the report.
(RDLDocPathHard) Whether this is to include the full path). Check box is only available if 'include the drawing file name' is ticked.
Example: "Drawing1" or with path "c:\AllMasterSoftware\CabMaster\Data\Drawing1"
(RDLChecksHard) Ability to add production checkboxes to reports.
(RDLAccuracyHard) Rounding of dimensions.
Example
Example shows '1 Decimal' Accuracy, underlined in red.
(Property names shown in italics)
